NSN 5306-01-486-9431
Coaxial Connector
Overall length 2.661-2.641.
Manufacturer part number 95988-10-28 for national stock number 5306014869431.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-486-9431.
-
MPN or Model
95988-10-28
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.901 inches -
Fastener Length
2.902 inches -
Head Height
0.673 inches -
Width Between Flats
Between 0.803 inches and 0.814 inches -
Extended Washer Diameter
1.190 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Single Shear Strength
145000 pounds per square inch -
Thread Diameter
0.6250 inches -
Grip Length
1.750 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Material
Cobalt comp mp-35-n -
Material Specification
Ams 5844 assn standard single material response
More from these suppliers
- 5305-00-052-4261 MPN NAS1207-38Close Tolerance Screw
- 5305-00-187-5610 MPN NAS1101E08-24Machine Screw
- 5305-00-310-6415 MPN HT4028L7-11Close Tolerance Screw
- 5305-00-345-2365 MPN HT4024L3D4Close Tolerance Screw
- 5305-00-346-3639 MPN HT4024L3D3-1Close Tolerance Screw
- 5305-00-460-3041 MPN 106363-3-6Machine Screw
- 5305-00-505-2520 MPN LS15266V3-1Machine Screw
- 5305-00-680-6395 MPN NAS1203-5Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-486-9431 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
95988-10-28 | Sps Technologies, Llc |