NSN 5306-01-487-5251
Coaxial Connector
0.573 inches fastener length, hexagon head style, 0.110 inches head height, width between flats: between 0.367 inches and 0.375 inches .
Manufacturer part number NAS2813-4 for national stock number 5306014875251.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-487-5251.
-
MPN or Model
NAS2813-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
0.573 inches -
Head Style
Hexagon -
Head Height
0.110 inches -
Width Between Flats
Between 0.367 inches and 0.375 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Thread Diameter
0.190 inches -
Grip Length
0.250 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
3910 pounds per square inch -
Material
Steel uns s34720 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or ams 6322 military specification 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty ii, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-539-7169 MPN NAS543-2Toggle Switch
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-020-3639 MPN NAS1100C06-8Machine Screw
- 5305-00-071-2502 MPN MS24694A116Machine Screw
- 5305-00-121-2342 MPN MS27039C1-29Machine Screw
- 5305-00-225-9092 MPN MS90726-37Hexagon Head Cap Screw
- 5305-00-406-9202 MPN NAS1218-06-14PMachine Screw
- 5305-00-469-8440 MPN MS27039DD4-27Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-487-5251 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2813-4 | National Aerospace Standards |
10116302 | Nimikkeistokeskus Ncb Finland |
NAS2813-4 | National Aerospace Standards |
10116302 | Nimikkeistokeskus Ncb Finland |
NAS2813-4 | National Aerospace Standards |
10116302 | Nimikkeistokeskus Ncb Finland |