NSN 5306-01-487-8007
Coaxial Connector
1.1719 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number NAS464P7-12 for national stock number 5306014878007.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-487-8007.
-
MPN or Model
NAS464P7-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.306 inches and 0.453 inches -
Fastener Length
1.1719 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Single Shear Strength
14300 pounds per square inch -
Thread Diameter
0.438 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5975-01-149-8889 MPN NAS1544-2A1Electrical Wall Plate
- 5935-01-355-3702 MPN AS50151Electrical Plug Connector
- 5305-00-052-8887 MPN MS24630-24Tapping Screw
- 5305-00-053-1084 MPN MS35199-51Machine Screw
- 5305-00-057-0527 MPN MS51958-31Machine Screw
- 5305-00-058-2898 MPN NAS1142E2Close Tolerance Screw
- 5305-00-058-9377 MPN MS51977-49Setscrew
- 5305-00-127-0165 MPN NAS623-3-29Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-487-8007 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464P7-12 | National Aerospace Standards |