NSN 5306-01-487-8013
Coaxial Connector
Drilled head.
Manufacturer part number NAS1305-46H for national stock number 5306014878013.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-487-8013.
-
MPN or Model
NAS1305-46H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
3.344 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
2.875 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.694 inches first hole -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas1305 professional/industrial association standard
More from these suppliers
- 5940-00-827-6557 MPN NAS1063A4-1Terminal Board Marker Strip
- 5940-01-413-3022 MPN NAS1063B92-111Terminal Board Marker Strip
- 5305-00-007-6182 MPN NAS1100E04-10PMachine Screw
- 5305-00-051-0634 MPN MS90725-201Hexagon Head Cap Screw
- 5305-00-052-6907 MPN MS24629-2Tapping Screw
- 5305-00-054-9235 MPN MS24694C123Machine Screw
- 5305-00-069-4914 MPN NAS1404-12Machine Screw
- 5305-00-162-4066 MPN NAS1221-08-6PMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-487-8013 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1305-46H | National Aerospace Standards |