NSN 5306-01-488-8368
Wheel Bolt
6.904 inches fastener length, hexagon head style, between 0.265 inches and 0.297 inches head height, width between flats: between 0.741 inches and 0.751 inches .
Manufacturer part number NAS1008-97 for national stock number 5306014888368.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-488-8368.
-
MPN or Model
NAS1008-97
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.842 inches -
Fastener Length
6.904 inches -
Head Style
Hexagon -
Head Height
Between 0.265 inches and 0.297 inches -
Width Between Flats
Between 0.741 inches and 0.751 inches -
Shank Unthreaded Hole Diameter
0.106 inches and 0.116 inches -
Thread Diameter
0.5000 inches -
Grip Length
6.062 inches -
Thready Qty Per Inch (tpi)
20 -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.599 inches and 0.619 inches -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-763-6983 MPN NAS1196-13XReceptacle Dummy Connector
- 5940-01-470-3351 MPN NAS1063A20-500BETerminal Board Marker Strip
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-038-8994 MPN NAS1352-4-14PSocket Head Cap Screw
- 5305-00-045-4832 MPN NAS1352-08H4PSocket Head Cap Screw
- 5305-00-052-9802 MPN NASM24694-C50Machine Screw
- 5305-00-055-2569 MPN NAS1216-04-7Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-488-8368 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1008-97 | National Aerospace Standards |