NSN 5306-01-489-5922
Coaxial Connector
Dry film lubricant per mil-l-46010, type i.
Manufacturer part number MS14181-05012L for national stock number 5306014895922.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-489-5922.
-
MPN or Model
MS14181-05012L
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.589 inches -
Fastener Length
Between 1.349 inches and 1.379 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.035 inches and 0.055 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Head Minor Diameter
Between 0.360 inches and 0.375 inches -
End Application
F-22 -
Thread Diameter
0.313 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams5662j assn standard 1st material response or ams5663 assn standard 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-6187 MPN NAS1100E08-32Machine Screw
- 5305-00-050-9217 MPN MS24678-48CSocket Head Cap Screw
- 5305-00-052-2234 MPN MS24667-76Socket Head Cap Screw
- 5305-00-058-0778 MPN MS24678-67CSocket Head Cap Screw
- 5305-00-150-0847 MPN NAS1189C06T24LSocket Head Cap Screw
- 5305-00-205-0193 MPN NAS1351-3-6PSocket Head Cap Screw
- 5305-00-225-9082 MPN MS90726-27Hexagon Head Cap Screw
- 5305-00-230-6601 MPN NAS1505-14Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-489-5922 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS14181-05012L | National Aerospace Standards |
MS14181-05012L | Military Standards |
Stock Check
- NS: 16
- NE: 148