NSN 5306-01-490-1722
Coaxial Connector
Dry film lubricant per mil-l-46010, type i.
Manufacturer part number MS14181-03004L for national stock number 5306014901722.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-490-1722.
-
MPN or Model
MS14181-03004L
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.408 inches -
Fastener Length
Between 0.668 inches and 0.698 inches -
Head Style
Spline extended washer -
Head Height
Between 0.195 inches and 0.215 inches -
Extended Washer Diameter
Between 0.349 inches and 0.359 inches -
Extended Washer Thickness
Between 0.017 inches and 0.037 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Head Minor Diameter
Between 0.173 inches and 0.188 inches -
End Application
F-22 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
22000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response or ams5663 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-443-8866 MPN NAS1063Terminal Board Marker Strip
- 5940-01-381-7112 MPN NAS1063B236-245Terminal Board Marker Strip
- 5305-00-054-9342 MPN NAS1100C02-6Machine Screw
- 5305-00-068-5416 MPN MS16995-41Socket Head Cap Screw
- 5305-00-078-8606 MPN NAS560HK3-15Machine Screw
- 5305-00-114-1915 MPN NAS1352-16LE64PSocket Head Cap Screw
- 5305-00-143-3201 MPN MS21093-343Machine Screw
- 5305-00-144-0345 MPN NAS1190-3T10LKSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-490-1722 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS14181-03004L | National Aerospace Standards |
MS14181-03004L | Military Standards |
Stock Check
- NS: 30
- NE: 1203