NSN 5306-01-490-1730
Coaxial Connector
Dry film lubricant per mil-l-46010, type i.
Manufacturer part number MS14181-05037L for national stock number 5306014901730.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-490-1730.
-
MPN or Model
MS14181-05037L
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.589 inches -
Fastener Length
Between 2.912 inches and 2.942 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.035 inches and 0.055 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Head Minor Diameter
Between 0.360 inches and 0.375 inches -
End Application
F-22 -
Thread Diameter
0.313 inches -
Grip Length
Between 2.303 inches and 2.323 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard 1st material response or ams5663 assn standard 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-833-5836 MPN NAS1063A2-803Terminal Board Marker Strip
- 5940-01-425-6508 MPN NAS1063A5-443Terminal Board Marker Strip
- 5940-01-430-4123 MPN NAS1063A10-502ASTerminal Board Marker Strip
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-004-4040 MPN NAS1351-3LE6Socket Head Cap Screw
- 5305-00-051-4496 MPN MS51973-18Setscrew
- 5305-00-057-0477 MPN MS24694C112Machine Screw
- 5305-00-061-7962 MPN NAS1204-20WClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-490-1730 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS14181-05037L | National Aerospace Standards |
MS14181-05037L | Military Standards |