NSN 5306-01-491-1994
Coaxial Connector
5.234 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.552 inches and 0.564 inches .
Manufacturer part number NAS464P6-78 for national stock number 5306014911994.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-491-1994.
-
MPN or Model
NAS464P6-78
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.359 inches -
Fastener Length
5.234 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.552 inches and 0.564 inches -
Grip Diameter
Between 0.373 inches and 0.374 inches -
Thread Diameter
0.375 inches -
Grip Length
4.875 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-051-5907 MPN NAS333C6Close Tolerance Screw
- 5305-00-059-3673 MPN NAS1635-4-6Machine Screw
- 5305-00-082-6667 MPN NAS1352C0C-12PSocket Head Cap Screw
- 5305-00-205-3463 MPN NAS1351-4H10Socket Head Cap Screw
- 5305-00-208-6347 MPN MS24694-S97Socket Head Cap Screw
- 5305-00-225-9445 MPN MS16996-34Socket Head Cap Screw
- 5305-00-226-7608 MPN MS16995-99Socket Head Cap Screw
- 5305-00-253-5627 MPN MS21318-48Drive Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-491-1994 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464P6-78 | National Aerospace Standards |