NSN 5306-01-491-2124
Coaxial Connector
8.548 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6608D125 for national stock number 5306014912124.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-491-2124.
-
MPN or Model
NAS6608D125
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
8.548 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
0.245 inches -
Thread Diameter
0.250 inches -
Grip Length
7.813 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
16000 pounds per square inch -
Material
Steel comp e4340 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-108-7604 MPN NAS1650R14B19PNElectrical Receptacle Connector
- 5940-01-510-2783 MPN NAS1063C3Terminal Board Cover
- 5305-00-008-5896 MPN NAS1102C5-10Machine Screw
- 5305-00-057-3800 MPN NAS1635-00-6Machine Screw
- 5305-00-060-4372 MPN NAS1633-16Close Tolerance Screw
- 5305-00-111-0720 MPN NAS1102-3-32Machine Screw
- 5305-00-225-4592 MPN MS24694A54Machine Screw
- 5305-00-274-2310 MPN NAS608C440-6Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-491-2124 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6608D125 | National Aerospace Standards |