NSN 5306-01-491-9060
Coaxial Connector
0.9688 inches fastener length, hexagon head style, between 0.078 inches and 0.110 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number NAS464-3-10 for national stock number 5306014919060.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-491-9060.
-
MPN or Model
NAS464-3-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.344 inches -
Fastener Length
0.9688 inches -
Head Style
Hexagon -
Head Height
Between 0.078 inches and 0.110 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Thread Diameter
0.190 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.875 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-581-9782 MPN NAS707G3Stud Terminal
- 5930-00-683-1628 MPN MS24523-22Toggle Switch
- 5940-01-595-6762 MPN NAS1063D-1-5Terminal Board Marker Strip
- 5940-01-381-7134 MPN NAS1063B246-255Terminal Board Marker Strip
- 5305-00-008-5906 MPN NAS1189E02T6LSocket Head Cap Screw
- 5305-00-051-4483 MPN MS51973-8Setscrew
- 5305-00-104-7608 MPN NAS1352C3LN40Socket Head Cap Screw
- 5305-00-177-5756 MPN MS24667-11Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-491-9060 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464-3-10 | National Aerospace Standards |