NSN 5306-01-491-9428
Coaxial Connector
Between 0.0160 inches and 0.1852 inches fastener length, hexagon head style, between 0.3120 inches and 0.3270 inches head height, width between flats: between 0.9280 inches and 0.9400 inches .
Manufacturer part number NAS6710DU28 for national stock number 5306014919428.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-491-9428.
-
MPN or Model
NAS6710DU28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.9020 inches -
Fastener Length
Between 0.0160 inches and 0.1852 inches -
Head Style
Hexagon -
Head Height
Between 0.3120 inches and 0.3270 inches -
Width Between Flats
Between 0.9280 inches and 0.9400 inches -
Grip Diameter
Between 0.6235 inches and 0.6240 inches -
Thread Diameter
0.6250 inches -
Grip Length
Between 0.9180 inches and 0.9500 inches -
Thready Qty Per Inch (tpi)
18 -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5305-00-007-6172 MPN NAS1100C00-4Machine Screw
- 5305-00-008-9112 MPN NAS1190C02T3LSocket Head Cap Screw
- 5305-00-057-9592 MPN MS35199-23Machine Screw
- 5305-00-057-9611 MPN MS24621-28Tapping Screw
- 5305-00-075-3085 MPN MS35308-457Hexagon Head Cap Screw
- 5305-00-128-1996 MPN NAS222-27Machine Screw
- 5305-00-137-3042 MPN MS51861-41CTapping Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-491-9428 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6710DU28 | National Aerospace Standards |