NSN 5306-01-493-2867
Coaxial Connector
Between 1.765 inches and 1.785 inches fastener length, double hexagon head style, between 0.200 inches and 0.220 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number EWSB22-6A22 for national stock number 5306014932867.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-493-2867.
-
MPN or Model
EWSB22-6A22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.400 inches -
Fastener Length
Between 1.765 inches and 1.785 inches -
Head Style
Double hexagon -
Head Height
Between 0.200 inches and 0.220 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.365 inches and 1.388 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp h11 -
Material Specification
Aams 6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
As 672 assn standard 11th treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-390-0648 MPN NAS1190E04P7Socket Head Cap Screw
- 5305-00-395-4195 MPN NAS1221-08-2TMachine Screw
- 5305-00-456-7805 MPN NAS1133V4Close Tolerance Screw
- 5305-00-527-4419 MPN 3MFR584-14Close Tolerance Screw
- 5305-01-043-0014 MPN 106750-5-18Close Tolerance Screw
- 5305-01-075-7089 MPN C7984-6D33Close Tolerance Screw
- 5305-01-076-3155 MPN NAS1101-06-20Machine Screw
- 5305-01-105-1143 MPN HT4068-4-11AClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-493-2867 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22-6A22 | Sps Technologies, Llc |