NSN 5306-01-493-4152
Coaxial Connector
Between 0.5605 inches and 0.5615 inches head height, between 0.5605 inches and 0.5615 inches grip diameter, 125000 pounds per square inch single shear strength, thread diameter: 0.562 inches.
Manufacturer part number 160J611311-21 for national stock number 5306014934152.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-493-4152.
-
MPN or Model
160J611311-21
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Length
0.590 inches -
Head Height
Between 0.5605 inches and 0.5615 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Single Shear Strength
125000 pounds per square inch -
Thread Diameter
0.562 inches -
Grip Length
1.750 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams 5962 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-127-5684 MPN NAS1135V11Close Tolerance Screw
- 5305-00-507-2076 MPN LS15265V3-28Close Tolerance Screw
- 5305-00-522-9598 MPN HT4024L8-12Close Tolerance Screw
- 5305-00-626-7424 MPN 54266-3-6Machine Screw
- 5305-00-914-3816 MPN NAS1221-4-4Machine Screw
- 5305-00-915-4762 MPN C792-3-6Machine Screw
- 5305-00-937-0765 MPN 64228V4-5Machine Screw
- 5305-00-988-4115 MPN 56040-3-10Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-493-4152 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
160J611311-21 | Sps Technologies, Llc |