NSN 5306-01-493-4158
Coaxial Connector
1.409 inches fastener length, 0.300 inches head height, between 0.2485 inches and 0.2495 inches grip diameter, single shear strength: 125000 pounds per square inch.
Manufacturer part number 95934-4-15 for national stock number 5306014934158.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-493-4158.
-
MPN or Model
95934-4-15
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
0.471 inches -
Fastener Length
1.409 inches -
Head Height
0.300 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Single Shear Strength
125000 pounds per square inch -
Thread Diameter
0.250 inches -
Grip Length
0.9375 inches -
Thready Qty Per Inch (tpi)
26 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams 5962 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-839-0526 MPN 16555-4Pilots Strut Collar
- 1560-01-575-2564 MPN 3M943E5-4-4Headle Shoulder Pin
- 5305-00-141-7319 MPN 66584-08-6Machine Screw
- 5305-00-185-0239 MPN NAS1101-3-41Machine Screw
- 5305-00-309-4381 MPN 73573-3-9Socket Head Cap Screw
- 5305-00-450-5973 MPN C387V4-14Close Tolerance Screw
- 5305-00-541-9319 MPN 106706T8-20Close Tolerance Screw
- 5305-00-889-2658 MPN NAS1190-08P10LSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-493-4158 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
95934-4-15 | Sps Technologies, Llc |