NSN 5306-01-493-8712
Coaxial Connector
Between 2.105 inches and 2.135 inches fastener length, hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6304-28 for national stock number 5306014938712.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-493-8712.
-
MPN or Model
NAS6304-28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 2.105 inches and 2.135 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
6470 pounds per square inch -
Material
Iron alloy 660 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-6520 MPN NAS1063A15-327Terminal Board Marker Strip
- 5940-01-510-2783 MPN NAS1063C3Terminal Board Cover
- 5305-00-051-7372 MPN NAS221C19Machine Screw
- 5305-00-079-2588 MPN NAS1154-29Close Tolerance Screw
- 5305-00-088-8332 MPN MS35190-272Machine Screw
- 5305-00-104-5073 MPN NAS1352-4LE40PSocket Head Cap Screw
- 5305-00-115-6186 MPN MS21097-3012Socket Head Cap Screw
- 5305-00-225-8476 MPN MS24693-S144Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-493-8712 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6304-28 | National Aerospace Standards |