NSN 5306-01-495-0544
Close Tolerance Hex Head Bolt
Between 1.804 inches and 1.834 inches fastener length, hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.678 inches and 0.690 inches .
Manufacturer part number NAS6607DH18 for national stock number 5306014950544.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-495-0544.
-
MPN or Model
NAS6607DH18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.694 inches -
Fastener Length
Between 1.804 inches and 1.834 inches -
Head Style
Hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.678 inches and 0.690 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Thread Diameter
0.4375 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416; type 2; class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6607 professional/industrial association standard
More from these suppliers
- 5940-01-451-3030 MPN NAS1063A10-105BUTerminal Board Marker Strip
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-004-5184 MPN NAS1102-3-36Machine Screw
- 5305-00-005-0628 MPN NAS1190-02T3LSocket Head Cap Screw
- 5305-00-052-9956 MPN MS24619-14Tapping Screw
- 5305-00-054-9241 MPN MS24694C100Machine Screw
- 5305-00-059-2484 MPN MS51976-36Setscrew
- 5305-00-068-5276 MPN NAS1352C04-4Socket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-495-0544 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6607DH18 | National Aerospace Standards |
NAS6607DH18 | National Aerospace Standards |
NAS6607DH18 | National Aerospace Standards |
NAS6607DH18 | National Aerospace Standards |
NAS6607DH18 | National Aerospace Standards |
NAS6607DH18 | National Aerospace Standards |
NAS6607DH18 | National Aerospace Standards |