NSN 5306-01-495-1644
Coaxial Connector
Between 1.222 inches and 1.252 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6704HU13 for national stock number 5306014951644.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-495-1644.
-
MPN or Model
NAS6704HU13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 1.222 inches and 1.252 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Hole Diameter
Between 0.046 inches and 0.056 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
End Application
Joint stars tcto 1e-8c-578 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-187-5286 MPN AIA/NAS NASM21603-L3-24-3Nut Gang
- 5935-01-218-6323 MPN NAS1100C08-8Screw
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5305-00-001-4754 MPN NAS1018-34AHexagon Head Cap Screw
- 5305-00-007-1550 MPN NAS1131E96PClose Tolerance Screw
- 5305-00-052-9571 MPN NAS1351C04H4Socket Head Cap Screw
- 5305-00-102-3007 MPN NAS1218-3-9PMachine Screw
- 5305-00-104-7608 MPN NAS1352C3LN40Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-495-1644 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6704HU13 | National Aerospace Standards |
NAS6704HU13 | National Aerospace Standards |
NAS6704HU13 | National Aerospace Standards |
NAS6704HU13 | National Aerospace Standards |
NAS6704HU13 | National Aerospace Standards |