NSN 5306-01-495-4040
Coaxial Connector
Between 1.113 inches and 1.143 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS1104-13D for national stock number 5306014954040.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-495-4040.
-
MPN or Model
NAS1104-13D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 1.113 inches and 1.143 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Shank Unthreaded Hole Diameter
0.010 inches first hole and 0.020 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
4520 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.007 inches first hole and 1.017 inches first hole -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-6516 MPN NAS1063A5-449Terminal Board Marker Strip
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-003-8160 MPN NAS1351-5-28PSocket Head Cap Screw
- 5305-00-008-9049 MPN NAS1743C4T16USocket Head Cap Screw
- 5305-00-052-5691 MPN NAS1352-08H16Socket Head Cap Screw
- 5305-00-054-6652 MPN MS51957-28Machine Screw
- 5305-00-057-0537 MPN MS51958-53Machine Screw
- 5305-00-057-0539 MPN NASM51958Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-495-4040 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1104-13D | National Aerospace Standards |
Stock Check
- NS: 694
- NE: 3770
- OH: 1
- SV: 1
- AR: 1