NSN 5306-01-496-3412
Coaxial Connector
Between 1.293 inches and 1.323 inches fastener length, flat countersunk head style, between 0.456 inches and 0.508 inches head diameter, locking feature: slotted head.
Manufacturer part number SC5050-4-13 for national stock number 5306014963412.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-496-3412.
-
MPN or Model
SC5050-4-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 1.293 inches and 1.323 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.456 inches and 0.508 inches -
Locking Feature
Slotted head -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Material Specification
Nas 498 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii class2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-083-3350 MPN HT8138-4-5TClose Tolerance Screw
- 5305-00-402-6246 MPN SC2000C832-10Machine Screw
- 5305-00-809-1739 MPN 51B333-14HMachine Screw
- 5305-01-044-7473 MPN HT4N-11Close Tolerance Screw
- 5305-01-050-5038 MPN HT4009-3-10Shoulder Screw
- 5305-01-054-6258 MPN VT1694F3-11Close Tolerance Screw
- 5305-01-059-4881 MPN VT1693F5-16Close Tolerance Screw
- 5305-01-084-4698 MPN HT4016-4-4XShoulder Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-496-3412 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC5050-4-13 | Arconic Global Fasteners & Rings, |
SC5050-4-13 | Boeing Company, The |