NSN 5306-01-496-3606
Coaxial Connector
Between 1.173 inches and 1.203 inches fastener length, dished hexagon head style, between 0.312 inches and 0.327 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number NAS6310PU9 for national stock number 5306014963606.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-496-3606.
-
MPN or Model
NAS6310PU9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.626 inches -
Fastener Length
Between 1.173 inches and 1.203 inches -
Head Style
Dished hexagon -
Head Height
Between 0.312 inches and 0.327 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Locking Feature
Patch threads -
Grip Diameter
Between 0.6235 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response or ams5853 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-470-3342 MPN NAS1063A6-510BDTerminal Board Marker Strip
- 5940-01-470-3346 MPN NAS1063A2-107BATerminal Board Marker Strip
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-057-1679 MPN NAS1101-02-6Machine Screw
- 5305-00-069-4914 MPN NAS1404-12Machine Screw
- 5305-00-079-5835 MPN MS24693-C50Machine Screw
- 5305-00-282-4200 MPN NAS221-17Machine Screw
- 5305-00-310-6343 MPN NAS5204U26Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-496-3606 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6310PU9 | Zf Industrieantriebe Witten Gmbh |
NAS6310PU9 | National Aerospace Standards |
Stock Check
- NE: 142
- NS: 16