NSN 5306-01-498-6723
Coaxial Connector
1.173 inches fastener length, dished hexagon head style, 0.250 inches head height, width between flats: 0.750 inches .
Manufacturer part number NAS6308U7 for national stock number 5306014986723.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-498-6723.
-
MPN or Model
NAS6308U7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
1.173 inches -
Head Style
Dished hexagon -
Head Height
0.250 inches -
Width Between Flats
0.750 inches -
Grip Diameter
Between 0.490 inches and 0.500 inches -
Thread Diameter
0.500 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-067-0916 MPN NAS1653REV2Electrical Plug Connector
- 5940-01-425-7398 MPN NAS1063C8-302Terminal Board Marker Strip
- 1680-01-532-3063 MPN NAS77A6-023NAirc Sleeve Bushing
- 5305-00-057-0534 MPN NASM51958Machine Screw
- 5305-00-058-9359 MPN MS51977-10Setscrew
- 5305-00-068-5400 MPN MS24667-22Socket Head Cap Screw
- 5305-00-114-8859 MPN NAS1635-06-10Machine Screw
- 5305-00-138-0067 MPN NAS1351C08-4Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-498-6723 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6308U7 | National Aerospace Standards |