NSN 5306-01-498-6737
Coaxial Connector
2.965 inches fastener length, dished hexagon head style, between 0.312 inches and 0.327 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number NAS6610-33 for national stock number 5306014986737.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-498-6737.
-
MPN or Model
NAS6610-33
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.877 inches and 0.927 inches -
Fastener Length
2.965 inches -
Head Style
Dished hexagon -
Head Height
Between 0.312 inches and 0.327 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.623 inches and 0.624 inches -
End Application
F-22 raptor -
Thread Diameter
0.625 inches -
Grip Length
2.063 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, hex head, close tolerance, alloy steel, long thread, nonlocking -
Material
Steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-0179 MPN NAS1063A20-4MLSTerminal Board Marker Strip
- 5940-01-455-2468 MPN NAS1063A10-105BCTerminal Board Marker Strip
- 5305-00-005-0631 MPN NAS1509-22Close Tolerance Screw
- 5305-00-051-2328 MPN NAS1635-5-14Machine Screw
- 5305-00-059-8247 MPN MS35214-22Machine Screw
- 5305-00-067-3863 MPN NAS1189-3P7LSocket Head Cap Screw
- 5305-00-140-2081 MPN NAS1096-1-58Machine Screw
- 5305-00-149-8670 MPN NAS1100E02-6Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-498-6737 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6610-33 | National Aerospace Standards |