NSN 5306-01-498-6763
Coaxial Connector
7.104 inches fastener length, dished hexagon head style, between 0.375 inches and 0.390 inches head height, width between flats: between 1.052 inches and 1.065 inches .
Manufacturer part number NAS6612-97 for national stock number 5306014986763.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-498-6763.
-
MPN or Model
NAS6612-97
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.041 inches -
Fastener Length
7.104 inches -
Head Style
Dished hexagon -
Head Height
Between 0.375 inches and 0.390 inches -
Width Between Flats
Between 1.052 inches and 1.065 inches -
Grip Diameter
Between 0.748 inches and 0.749 inches -
End Application
F-22 raptor -
Thread Diameter
0.750 inches -
Grip Length
6.063 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, hex head, close tolerance, alloy steel, long thread, nonlocking -
Material
Steel comp 4140 -
Thread Series Designator
Unjf
More from these suppliers
- 5930-01-400-4025 MPN 2269-006Pressure Switch
- 5935-00-153-4395 MPN NAS1642R16-24SNElectrical Receptacle Connector
- 5305-00-052-6683 MPN MS35198-34Machine Screw
- 5305-00-052-7415 MPN MS35198-94Machine Screw
- 5305-00-054-6652 MPN MS51957-28Machine Screw
- 5305-00-066-7328 MPN MS24693-C27Machine Screw
- 5305-00-150-9579 MPN MILS7839Machine Screw
- 5305-00-203-1253 MPN NAS1635-04-18Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-498-6763 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6612-97 | National Aerospace Standards |