NSN 5306-01-500-1245
Coaxial Connector
0.485 inches fastener length, double hexagon w/hole head style, between 0.290 inches and 0.310 inches head height, width between flats: between 0.306 inches and 0.315 inches .
Manufacturer part number NAS624-33 for national stock number 5306015001245.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-500-1245.
-
MPN or Model
NAS624-33
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Fastener Length
0.485 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.290 inches and 0.310 inches -
Width Between Flats
Between 0.306 inches and 0.315 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
Between 0.059 inches and 0.079 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
End Application
Armored panel -
Thread Diameter
0.2500 inches -
Grip Length
2.046 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Material Specification
Ams 6322 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 national specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas624 professional/industrial association standard
More from these suppliers
- 5935-00-065-4580 MPN NAS1196-14XElectrical Receptacle Connector
- 5940-01-425-7412 MPN NAS1063A4-462Terminal Board Marker Strip
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5305-00-046-9800 MPN NAS514P1032-13PMachine Screw
- 5305-00-057-0489 MPN MS24694S2Machine Screw
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-500-1245 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS624-33 | National Aerospace Standards |
NAS624-33 | National Aerospace Standards |
NAS624-33 | National Aerospace Standards |
NAS624-33 | National Aerospace Standards |