NSN 5306-01-500-7103
Coaxial Connector
3.841 inches fastener length, spline extended washer head style, between 0.4360 inches and 0.4370 inches grip diameter, grip length: 3.125 inches .
Manufacturer part number MS21134-07050 for national stock number 5306015007103.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-500-7103.
-
MPN or Model
MS21134-07050
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Thread Length
0.701 inches -
Fastener Length
3.841 inches -
Head Style
Spline extended washer -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Grip Length
3.125 inches -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp 4140 -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-009-3157 MPN MS3476L20-41SNElectrical Plug Connector
- 5935-00-060-6321 MPN MS3106A20-15SWCElectrical Plug Connector
- 5935-00-060-7976 MPN MS3114E22-55SXElectrical Receptacle Connector
- 5940-00-082-4938 MPN MS35438-20Lug Terminal
- 5935-00-087-3845 MPN MS3124F14-12PElectrical Receptacle Connector
- 5930-00-177-2076 MPN MS16109-36-3-8NRotary Switch
- 5935-00-185-4991 MPN MS3108R22-28SElectrical Plug Connector
- 5935-00-189-2345 MPN MS27508E10B35PDElectrical Receptacle Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-500-7103 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21134-07050 | Military Standards |