NSN 5306-01-501-1773
Coaxial Connector
Between 5.655 inches and 5.685 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6608D79 for national stock number 5306015011773.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-501-1773.
-
MPN or Model
NAS6608D79
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
Between 5.655 inches and 5.685 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.494 inches and 0.495 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
4.935 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.454 inches first hole -
Material
Steel comp 4140 or steel comp 4340 or aluminum -
Material Specification
Mil-s-5626 military specification 1st material response or ams6415 assn standard 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type ii class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-939-9127 MPN NAS25-4RTrunnion Tank Strap
- 5935-01-605-9682 MPN NAS1641R12T12Electrical Receptacle Connector
- 5940-01-510-2081 MPN NAS1063A7Terminal Board Marker Strip
- 5305-00-007-1589 MPN NAS1102C02-7PMachine Screw
- 5305-00-058-9373 MPN MS51977-40Setscrew
- 5305-00-059-7408 MPN MS35202-25Machine Screw
- 5305-00-165-6947 MPN NAS230-19Machine Screw
- 5305-00-269-4209 MPN 207-19Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-501-1773 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6608D79 | National Aerospace Standards |