NSN 5306-01-501-2159
Coaxial Connector
3.550 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.502 inches .
Manufacturer part number NAS674V50 for national stock number 5306015012159.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-501-2159.
-
MPN or Model
NAS674V50
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.325 inches -
Fastener Length
3.550 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.502 inches -
Grip Diameter
0.189 inches -
Thread Diameter
0.250 inches -
Grip Length
3.125 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Titanium alloy uns r56400 -
Material Specification
Nas621 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-413-2999 MPN NAS1063B1-17Terminal Board Marker Strip
- 5940-01-652-2533 MPN NAS1063A4-TB138RDTerminal Board Marker Strip
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5305-00-003-9278 MPN NAS1221-4E42Machine Screw
- 5305-00-005-9071 MPN NAS1352-06H12PSocket Head Cap Screw
- 5305-00-006-9408 MPN MS3212-5Machine Screw
- 5305-00-051-2336 MPN MS51958-115Machine Screw
- 5305-00-051-6719 MPN MS3212-2Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-501-2159 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS674V50 | National Aerospace Standards |