NSN 5306-01-501-8293
Coaxial Connector
6.198 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS6303U94 for national stock number 5306015018293.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-501-8293.
-
MPN or Model
NAS6303U94
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
6.198 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
0.189 inches -
Thread Diameter
0.190 inches -
Grip Length
5.875 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard 1st material response or ams 5732 assn standard 2nd material response or ams 5737 assn standard 3rd material response or ams 5853 assn standard 4th material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Nas 4003 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-471-9923 MPN NAS1650R22B41PNElectrical Receptacle Connector
- 5305-00-097-4484 MPN MS21125-0428Close Tolerance Screw
- 5305-00-151-2024 MPN MILS7839Machine Screw
- 5305-00-163-2655 MPN NAS1581C5H5Close Tolerance Screw
- 5305-00-177-5287 MPN NAS1351-4H12PSocket Head Cap Screw
- 5305-00-186-9234 MPN NAS1352-02LL4PSocket Head Cap Screw
- 5305-00-210-4867 MPN NAS1207-9Close Tolerance Screw
- 5305-00-225-9093 MPN NASM90726-38Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-501-8293 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6303U94 | National Aerospace Standards |