NSN 5306-01-502-3890
Coaxial Connector
Between 0.825 inches and 0.855 inches fastener length, flat countersunk head style, 0.3504 inches head diameter, head height: 0.063 inches .
Manufacturer part number 124507-4-7 for national stock number 5306015023890.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-502-3890.
-
MPN or Model
124507-4-7
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 0.825 inches and 0.855 inches -
Head Style
Flat countersunk -
Head Diameter
0.3504 inches -
Head Height
0.063 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
0.437 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
13000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-047-2086 MPN 89WM1747-2Aircraft Structural Component Fitting
- 4920-00-073-5571 MPN 123GT10124Hydraul Adapter Set
- 5985-00-117-4702 MPN GW810BE1Waveguide Assembly
- 1560-00-124-2744 MPN 128CM11019-11Fli Transmitter Arm
- 1560-00-145-8293 MPN A51B92024-7Cowling
- 1560-00-153-8435 MPN A51B54004-1Aircraft Access Door
- 5930-00-153-8937 MPN GS835GJ2-12Rotary Switch
- 4820-00-171-1958 MPN A51E9088-1Check Valve
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-502-3890 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
124507-4-7 | Sps Technologies, Llc |
GB510FJ4-7 | Northrop Grumman Systems Corporation |