NSN 5306-01-502-6198
Coaxial Connector
Used on landing gear control valve.
Manufacturer part number NAS1110-50D for national stock number 5306015026198.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-502-6198.
-
MPN or Model
NAS1110-50D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.543 inches -
Fastener Length
3.668 inches -
Head Style
Hexagon -
Head Height
Between 0.312 inches and 0.327 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
End Application
C-135 aircraft -
Thread Diameter
0.6250 inches -
Grip Length
3.125 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
31950 pounds per square inch -
Material
Steel comp 4140 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1110 professional/industrial association standard
More from these suppliers
- 5940-00-764-1028 MPN NAS707S4Stud Terminal
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5940-01-428-6495 MPN NAS1063F1-6Terminal Board Marker Strip
- 5940-01-615-1074 MPN NAS1063C10-210MTerminal Board Marker Strip
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 1680-01-571-7708 MPN 10367-A-1032-17Controller Handle
- 5305-00-007-6182 MPN NAS1100E04-10PMachine Screw
- 5305-00-008-5910 MPN NAS1189E3T10Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-502-6198 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1110-50D | National Aerospace Standards |
NAS1110-50D | National Aerospace Standards |
NAS1110-50D | National Aerospace Standards |
NAS1110-50D | National Aerospace Standards |