NSN 5306-01-502-9291
Coaxial Connector
Between 1.1566 inches and 1.1587 inches fastener length, flat countersunk undercut head style, between 0.4689 inches and 0.4739 inches head diameter, head height: between 0.0593 inches and 0.0614 inches .
Manufacturer part number HL62-10-11 for national stock number 5306015029291.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-502-9291.
-
MPN or Model
HL62-10-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.530 inches -
Fastener Length
Between 1.1566 inches and 1.1587 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.4689 inches and 0.4739 inches -
Head Height
Between 0.0593 inches and 0.0614 inches -
Grip Diameter
Between 0.302 inches and 0.306 inches -
Thread Diameter
0.3125 inches -
Grip Length
0.688 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
5000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
Mil-s-500 military specification single material response or mil-s-5626 military specification single material response or mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-160-1350 MPN GB510CH06V3LESocket Head Cap Screw
- 5305-00-324-8543 MPN HT271-4-5Close Tolerance Screw
- 5305-00-324-9282 MPN HT4025L3-21Close Tolerance Screw
- 5305-00-519-7212 MPN HT4024L6-14Close Tolerance Screw
- 5305-00-519-7829 MPN HT4028LD4-10Close Tolerance Screw
- 5305-00-813-1573 MPN NAS1209-16DClose Tolerance Screw
- 5305-00-851-6413 MPN NAS1203-10DClose Tolerance Screw
- 5305-00-915-2600 MPN HR101H6-20Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-502-9291 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HL62-10-11 | Hi-shear Corporation |
HL62-10-11 | Lisi Aerospace Canada Corp |
HL62-10-11 | Lisi Aerospace Canada Corp |
HL62-10-11 | Hi-shear Corporation |
HL62-10-11 | Lisi Aerospace Canada Corp |
HL62-10-11 | Hi-shear Corporation |
HL62-10-11 | Lisi Aerospace Canada Corp |
HL62-10-11 | Hi-shear Corporation |
HL62-10-11 | Lisi Aerospace Canada Corp |
HL62-10-11 | Hi-shear Corporation |
HL62-10-11 | Lisi Aerospace Canada Corp |
HL62-10-11 | Hi-shear Corporation |
HL62-10-11 | Lisi Aerospace Canada Corp |
HL62-10-11 | Hi-shear Corporation |
HL62-10-11 | Lisi Aerospace Canada Corp |