NSN 5306-01-504-0170
Coaxial Connector
0.988 inches fastener length, flat countersunk head style, 0.506 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1790-4R9 for national stock number 5306015040170.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-504-0170.
-
MPN or Model
NAS1790-4R9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
0.988 inches -
Head Style
Flat countersunk -
Head Diameter
0.506 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
0.563 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626 military specification all material responses -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-010-1571 MPN NAS1745-11Conductor Splice
- 5940-01-351-3864 MPN NAS1063A15-10SCTerminal Board
- 1680-01-535-3482 MPN NAS42DD6A-11NAircr Sleeve Spacer
- 5930-01-622-7018 MPN MS24655-135Toggle Switch
- 5305-00-050-6824 MPN MS24677-76Socket Head Cap Screw
- 5305-00-182-9362 MPN NAS1633-24Machine Screw
- 5305-00-205-3463 MPN NAS1351-4H10Socket Head Cap Screw
- 5305-00-435-9101 MPN NAS1189-3P20LSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-504-0170 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1790-4R9 | National Aerospace Standards |