NSN 5306-01-504-2148
Coaxial Connector
Between 2.394 inches and 2.414 inches fastener length, double hexagon head style, 0.257 inches head height, width between flats: between 0.678 inches and 0.689 inches .
Manufacturer part number FEWSB22-7-A31 for national stock number 5306015042148.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-504-2148.
-
MPN or Model
FEWSB22-7-A31
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.466 inches -
Fastener Length
Between 2.394 inches and 2.414 inches -
Head Style
Double hexagon -
Head Height
0.257 inches -
Width Between Flats
Between 0.678 inches and 0.689 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
End Application
A10 -
Thread Diameter
0.438 inches -
Grip Length
Between 1.928 inches and 1.948 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-583-5400 MPN AEA7134-1Aircraft Hinge
- 1680-01-651-0556 MPN HLT265TB-8-16-41Rivet Pin
- 5305-00-036-6845 MPN SFH22-4A13Close Tolerance Screw
- 5305-00-065-0222 MPN NAS1189-06P4LSocket Head Cap Screw
- 5305-00-143-1864 MPN 106334-7-22Close Tolerance Screw
- 5305-00-233-6065 MPN 106385PT3-15Close Tolerance Screw
- 5305-00-680-5428 MPN NAS1203-46Close Tolerance Screw
- 5305-00-897-6013 MPN 66117H4-14Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-504-2148 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FEWSB22-7-A31 | Sps Technologies, Llc |