NSN 5306-01-504-7861
Coaxial Connector
1.645 inches fastener length, double hexagon extended washer head style, 0.388 inches head height, width between flats: between 0.422 inches and 0.437 inches .
Manufacturer part number 12387352-06016 for national stock number 5306015047861.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-504-7861.
-
MPN or Model
12387352-06016
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.645 inches -
Fastener Length
1.645 inches -
Head Style
Double hexagon extended washer -
Head Height
0.388 inches -
Width Between Flats
Between 0.422 inches and 0.437 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
End Application
5420-01-430-5403 -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel comp 4140 and steel comp 4340 and steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response and mil-s-5000 military specification 2nd material response and mil-s-6049 military specification 3rd material response and mil-s-8503 military specification 4th material response -
Surface Treatment
Phosphate zinc -
Surface Treatment Specification
Tt-c-490, type i federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-116-3226 MPN 1634313Special Shaped Actuator Valve Diaphragm
- 5975-00-355-8037 MPN 11646103-5Electrical Conductor Bushing
- 5930-00-411-5805 MPN 11589014Sensitive Switch
- 5935-00-844-5019 MPN 10949059Electrical Connector Bracket
- 5930-01-110-4213 MPN 12307598Push Switch
- 5935-01-124-9309 MPN 12307235Electrical Receptacle Connector
- 5930-01-292-6730 MPN 12414500Electrical Switch Cover
- 5935-01-346-1234 MPN 12387119-4Connector Adapter
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-504-7861 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
12387352-06016 | U S Army Tank Automotive Command |