NSN 5306-01-505-0919
Close Tolerance Hex Head Bolt
Between 4.122 inches and 4.152 inches fastener length, dished hexagon head style, between 0.438 inches and 0.453 inches head height, width between flats: between 1.239 inches and 1.252 inches .
Manufacturer part number BACB30NF14-54 for national stock number 5306015050919.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-505-0919.
-
MPN or Model
BACB30NF14-54
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.757 inches and 0.767 inches -
Fastener Length
Between 4.122 inches and 4.152 inches -
Head Style
Dished hexagon -
Head Height
Between 0.438 inches and 0.453 inches -
Width Between Flats
Between 1.239 inches and 1.252 inches -
Grip Diameter
Between 0.8730 inches and 0.8740 inches -
End Application
C-135 stratolifter -
Thread Diameter
0.875 inches -
Grip Length
Between 3.365 inches and 3.385 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Surface Finish
32.0 microinches -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-393-5604 MPN VT10021-3-11Close Tolerance Screw
- 5305-01-494-0615 MPN 3M1170C4D11AClose Tolerance Screw
- 5305-01-512-8306 MPN 3M1170C4-5AFClose Tolerance Screw
- 5305-01-512-8353 MPN 3M1170C3-6AFClose Tolerance Screw
- 5306-00-403-0175 MPN VFK100G-10038Shear Bolt
- 5306-00-528-5515 MPN VAL23029-8D19Close Tolerance Bolt
- 5306-00-903-9676 MPN MS21250-04072Shear Bolt
- 5306-00-923-1241 MPN VFK100G-08050Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-505-0919 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NF14-54 | The Boeing Company |
BACB30NF14-54 | Valley-todeco, Inc. |
BACB30NF14-54 | Sps Technologies, Llc |
BACB30NF14-54 | Arconic Global Fasteners & Rings, |
BACB30NF14-54 | Federal Manufacturing Corporation |
BACB30NF14-54 | Huck International, Inc. |
BACB30NF14-54 | Arconic Global Fasteners & Rings, |
BACB30NF14-54 | Sps Technologies, Llc |
BACB30NF14-54 | Sps Technologies, Llc |