NSN 5306-01-505-6976
Coaxial Connector
5.099 inches fastener length, double hexagon w/hole head style, 0.348 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number MS21250-05076 for national stock number 5306015056976.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-505-6976.
-
MPN or Model
MS21250-05076
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.589 inches and 0.609 inches -
Fastener Length
5.099 inches -
Head Style
Double hexagon w/hole -
Head Height
0.348 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
Between 0.521 inches and 0.531 inches -
Extended Washer Thickness
0.082 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 4.740 inches and 4.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp 8740 or steel comp 6150 or steel comp 4140 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-034-7151 MPN 12F1191-829Forward Thermal Radiation Panel
- 1560-00-083-0812 MPN 12W9605-64Aircraft Wing Spoiler
- 1560-00-221-6775 MPN 12W7525-801Aircraft Trailing Edge
- 1560-00-222-4907 MPN 540B154-805Fixed Canopy
- 1560-00-239-9823 MPN 12B10861-5Aircraft Structural Component Support
- 1560-00-283-2641 MPN 12S901-811Aircraft Door
- 1560-00-329-3748 MPN 12W6210-864Aircraft Leading Edge
- 1560-00-401-8667 MPN 12W3741-801Aircraft Fairing
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-505-6976 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-05076 | Military Standards |
MS21250-05076 | Lockheed Martin Corporation |