NSN 5306-01-506-0213
Coaxial Connector
Between 3.814 inches and 3.844 inches fastener length, hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.554 inches and 0.564 inches .
Manufacturer part number NAS6206-54D for national stock number 5306015060213.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-506-0213.
-
MPN or Model
NAS6206-54D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
Between 3.814 inches and 3.844 inches -
Head Style
Hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 3.365 inches and 3.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Thread Series Designator
Unf -
Specification Data
80205-nas6206 professional/industrial association standard
More from these suppliers
- 5935-01-110-7028 MPN NAS1653R22B41SNElectrical Plug Connector
- 5940-01-362-7188 MPN NAS1063Terminal Board Marker Strip
- 1560-01-423-0213 MPN NAS6708D38Aircraft Structural Component Support
- 5940-01-386-4758 MPN NAS1063B105-120Terminal Board Marker Strip
- 5305-00-007-1563 MPN NAS1100E06-6PMachine Screw
- 5305-00-031-2387 MPN NAS1184-10Close Tolerance Screw
- 5305-00-079-9618 MPN NAS1351-4LN8PSocket Head Cap Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-506-0213 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6206-54D | National Aerospace Standards |