NSN 5306-01-506-2001
Coaxial Connector
Part of rotary wing blade, bolt cuff attachment.
Manufacturer part number 70150-09700-102 for national stock number 5306015062001.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-506-2001.
-
MPN or Model
70150-09700-102
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
Between 6.847 inches and 6.877 inches -
Head Style
Hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4991 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 6.117 inches and 6.137 inches -
Thready Qty Per Inch (tpi)
20 -
Material
Steel comp 4340 -
Material Specification
Ams 6484 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-004-4052 MPN S1565-61839-3Block Assembly
- 1560-00-027-8871 MPN 65201-02055-042Pressure Refueling Fitting
- 4820-00-060-9111 MPN SS50-815K4DCheck Valve
- 1680-00-064-0294 MPN S6122-87729-001Probe Rod Scraper
- 1560-00-065-7248 MPN S6135-64013-2Drive Shaft Coupling Flange
- 1560-00-074-1902 MPN S6132-80176-1Latch Handle
- 1560-00-110-3105 MPN 65207-08005-047Sponson Fuel Cell Cover Assembly
- 1680-00-257-5134 MPN 65256-02044-101Brak Handle Fitting
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-506-2001 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
70150-09700-102 | Sikorsky Aircraft Corporation |
Stock Check
- NS: 114