NSN 5306-01-506-2010
Coaxial Connector
Part of rotary wing blade, cuff attachment.
Manufacturer part number 70150-09700-104 for national stock number 5306015062010.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-506-2010.
-
MPN or Model
70150-09700-104
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
Between 7.220 inches and 7.250 inches -
Head Style
Hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4991 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 6.490 inches and 6.510 inches -
Thready Qty Per Inch (tpi)
20 -
Material
Steel comp 4340 -
Material Specification
Ams 6484 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, typeii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-021-5355 MPN S6132-80144-1Support Bushing
- 5935-00-050-9888 MPN SS7108-18AElectrical Connector Backshell
- 1560-00-064-8213 MPN 65205-07005-115Aircraft Fairing
- 1560-00-065-6210 MPN S6130-80041-001Sleeve Cap
- 1560-00-065-6254 MPN S6132-80135-1Drag Strut Assembly
- 1560-00-065-7133 MPN S6152-62407-2Aft Air Intake Duct
- 1680-00-068-0807 MPN 65502-01002-118Nonrotating Shaft Eye Bracket
- 1560-00-420-0917 MPN 6465-62088-045Block Support
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-506-2010 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
70150-09700-104 | Sikorsky Aircraft Corporation |
Stock Check
- NE: 1
- NS: 4