NSN 5306-01-506-3329
Coaxial Connector
Between 3.674 inches and 3.704 inches fastener length, dished hexagon head style, between 0.312 inches and 0.327 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number NAS6210-49D for national stock number 5306015063329.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-506-3329.
-
MPN or Model
NAS6210-49D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.601 inches and 0.651 inches -
Fastener Length
Between 3.674 inches and 3.704 inches -
Head Style
Dished hexagon -
Head Height
Between 0.312 inches and 0.327 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
End Application
C-135 aircraft -
Thread Diameter
0.625 inches -
Grip Length
Between 3.053 inches and 3.073 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.394 inches first hole and 3.444 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-524-1333 MPN NAS1375A04SB07Aircr Air Duct Hose
- 1560-01-594-5018 MPN NAS1919C04-06PAircraft Stiffener
- 5305-00-007-6201 MPN NAS1102C04-9Machine Screw
- 5305-00-059-8249 MPN MS35314-24Machine Screw
- 5305-00-069-4943 MPN NAS2806-16Close Tolerance Screw
- 5305-00-082-6941 MPN NAS1081-3A10Setscrew
- 5305-00-145-0865 MPN NAS1635-02LE5PSocket Head Cap Screw
- 5305-00-145-0984 MPN NAS662C2LER2Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-506-3329 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6210-49D | National Aerospace Standards |
NAS1110-49D | National Aerospace Standards |