NSN 5306-01-507-4821
Coaxial Connector
Between 2.361 inches and 2.391 inches fastener length, dished hexagon head style, between 0.312 inches and 0.327 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number NAS6210-28D for national stock number 5306015074821.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-507-4821.
-
MPN or Model
NAS6210-28D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.601 inches and 0.651 inches -
Fastener Length
Between 2.361 inches and 2.391 inches -
Head Style
Dished hexagon -
Head Height
Between 0.312 inches and 0.327 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.623 inches and 0.624 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.082 inches first hole and 2.132 inches first hole -
Material
Steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-111-4884 MPN NAS1666-22Electrical Connector Cable Clamp
- 5935-00-153-4395 MPN NAS1642R16-24SNElectrical Receptacle Connector
- 5940-01-425-6041 MPN NAS1063A5-436Terminal Board Marker Strip
- 5305-00-007-0285 MPN NAS1100E3-6PMachine Screw
- 5305-00-052-6941 MPN NAS1351C3-36Socket Head Cap Screw
- 5305-00-061-5114 MPN NAS1403-19Machine Screw
- 5305-00-066-7325 MPN MS24693-C5Machine Screw
- 5305-00-074-1995 MPN NAS1081C04A10NSetscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-507-4821 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6210-28D | National Aerospace Standards |