1-321-802-5889

NSN 5306-01-509-3905

Close Tolerance Hex Head Bolt

About this product

2.175 inches fastener length, undercut hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .

Manufacturer part number NAS1224C28L for national stock number 5306015093905.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-509-3905.

  • MPN or Model

    NAS1224C28L

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    0.425 inches
  • Fastener Length
    2.175 inches
  • Head Style
    Undercut hexagon
  • Head Height
    Between 0.125 inches and 0.140 inches
  • Width Between Flats
    Between 0.430 inches and 0.439 inches
  • Locking Feature
    Strip threads
  • Grip Diameter
    Between 0.1890 inches and 0.1895 inches
  • Thread Diameter
    0.250 inches
  • Grip Length
    Between 1.740 inches and 1.760 inches
  • Thready Qty Per Inch (tpi)
    28
  • Material
    Iron alloy 660
  • Material Specification
    Ams 5735 assn standard single material response
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-509-3905 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306015093905

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
NAS1224C28L National Aerospace Standards
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.