NSN 5306-01-509-5143
Coaxial Connector
Drilled head.
Manufacturer part number NAS6205-22DH for national stock number 5306015095143.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-509-5143.
-
MPN or Model
NAS6205-22DH
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.798 inches and 1.828 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.621 inches first hole and 1.641 inches first hole -
Material
Steel -
Material Specification
Mil-s-5000, 4340 or e4340 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6205 professional/industrial association standard
More from these suppliers
- 5940-00-267-5360 MPN NAS1746-8Conductor Splice
- 5940-01-381-7092 MPN NAS1063B226-235Terminal Board Marker Strip
- 5305-00-007-0217 MPN NAS1625-2Machine Screw
- 5305-00-007-3020 MPN NAS1102E02-4PMachine Screw
- 5305-00-008-9112 MPN NAS1190C02T3LSocket Head Cap Screw
- 5305-00-027-5666 MPN NAS608-256-4Socket Head Cap Screw
- 5305-00-067-5156 MPN MS21295-30Socket Head Cap Screw
- 5305-00-079-2588 MPN NAS1154-29Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-509-5143 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6205-22DH | National Aerospace Standards |