NSN 5306-01-509-5759
Coaxial Connector
2.188 inches fastener length, dished hexagon head style, 0.156 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS6405U29D for national stock number 5306015095759.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-509-5759.
-
MPN or Model
NAS6405U29D
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
2.188 inches -
Head Style
Dished hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
0.311 inches -
Shank Unthreaded Hole Diameter
0.081 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
1.812 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.182 inches first hole -
Material
Titanium alloy -
Material Specification
Ams4928 assn standard 1st material response or ams4967 assn standard 2nd material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-499-2085 MPN NAS1643R10T5SNElectrical Plug Connector
- 5940-01-341-7797 MPN NAS1063B-1-5Terminal Board Marker Strip
- 5905-01-604-0709 MPN 4610X-101-154LFFilm Fixed Resistor Network
- 5975-01-048-2922 MPN MS3367-6-0Electrical Components Tiedown Strap
- 5935-01-513-0334 MPN 5A088Electrical Receptacle Connector
- 5940-01-010-1571 MPN NAS1745-11Conductor Splice
- 5305-00-007-6182 MPN NAS1100C04-10PMachine Screw
- 5305-00-059-2490 MPN MS51976-46Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-509-5759 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6405U29D | National Aerospace Standards |