NSN 5306-01-513-2136
Coaxial Connector
1.716 inches fastener length, dished hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.678 inches and 0.690 inches .
Manufacturer part number NAS6307U19 for national stock number 5306015132136.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-513-2136.
-
MPN or Model
NAS6307U19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
1.716 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.678 inches and 0.690 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
End Application
Aircraft airbus a310, engine jt9d-7r4 -
Thread Diameter
0.438 inches -
Grip Length
1.186 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response or ams 5853 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-520-8560 MPN NAS1641R18T31SNElectrical Receptacle Connector
- 5940-01-425-7400 MPN NAS1063E4-301Terminal Board Marker Strip
- 5305-00-008-9049 MPN NAS1743C4T16USocket Head Cap Screw
- 5305-00-061-0227 MPN MS24677-20Socket Head Cap Screw
- 5305-00-068-0475 MPN MS35199-72Machine Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-156-2632 MPN MILS7839Machine Screw
- 5305-00-282-3551 MPN NAS221DD10Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-513-2136 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6307U19 | National Aerospace Standards |