NSN 5306-01-513-4062
Coaxial Connector
Between 2.025 inches and 2.055 inches fastener length, double hexagon w/hole head style, between 0.425 inches and 0.445 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number GB511GF7-22 for national stock number 5306015134062.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-513-4062.
-
MPN or Model
GB511GF7-22
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Length
Between 0.640 inches and 0.690 inches -
Fastener Length
Between 2.025 inches and 2.055 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.425 inches and 0.445 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Extended Washer Diameter
Between 0.740 inches and 0.750 inches -
Extended Washer Thickness
0.099 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Part Name Assigned By Controlling Agency
Navy special project -
Specification Data
26512-gb511gf manufacturers standard
More from these suppliers
- 4920-00-008-3556 MPN A51S21970-1Cable Breakout Adapter Set
- 1560-00-070-6048 MPN 128CSM11273-1Wing Fitting Assembly
- 1560-00-075-0808 MPN 123BP10041-1Aircraft Fairing
- 1560-00-075-3710 MPN 123AMM11633-1Pushrod Terminal
- 4820-00-085-1317 MPN A51P9023-7Fluid Pressure Regulating Valve
- 5950-00-140-3243 MPN A51A9148-1Current Transformer
- 5905-00-148-8338 MPN 1128SCSEA742-21Film Fixed Resistor Network
- 1680-00-251-5370 MPN 89576-15Bell Crank
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-513-4062 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB511GF7-22 | Northrop Grumman Systems Corporation |