NSN 5306-01-513-4861
Coaxial Connector
Ceramic bonded.
Manufacturer part number GB511GF8-9 for national stock number 5306015134861.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-513-4861.
-
MPN or Model
GB511GF8-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.736 inches and 0.786 inches -
Fastener Length
Between 1.308 inches and 1.338 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.494 inches and 0.514 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Extended Washer Diameter
Between 0.818 inches and 0.828 inches -
Extended Washer Thickness
Between 0.113 inches and 0.133 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Sps-s-671, cagec 56878 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5985-00-066-2914 MPN 123BP10004-11Antenna Cover
- 1560-00-148-7267 MPN A51B96101-407Vertical Stabilizer
- 1560-00-165-7650 MPN 87844-1Aircraft Channel
- 1560-00-239-8598 MPN 1128CSP40009-3Fairing Assembly
- 4920-00-300-8653 MPN 89GT1055Fuel Cell Vent Cap
- 1560-00-304-9853 MPN 37E52560-2-1Maneuv Tip Assembly
- 1560-00-320-6344 MPN 37F17282-22Aircraft Structural Plate
- 1560-00-351-9180 MPN A51B20204-34Aircraft Fairing
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-513-4861 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB511GF8-9 | Northrop Grumman Systems Corporation |