NSN 5306-01-513-4942
Coaxial Connector
Ceramic bonded.
Manufacturer part number GB511GF6-5 for national stock number 5306015134942.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-513-4942.
-
MPN or Model
GB511GF6-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.535 inches and 0.585 inches -
Fastener Length
Between 0.857 inches and 0.887 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.378 inches and 0.398 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
Between 0.081 inches and 0.101 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Sps-p-671, cagec 56878 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-005-2861 MPN GC15J10T5PNElectrical Plug Connector
- 4820-00-021-3696 MPN 89SP1132Directional Control Linear Valve
- 1560-00-075-0874 MPN 123BM10050-7Pivot Fitting
- 1560-00-109-5766 MPN 1128P41500-52Exhaust Pipe
- 1560-00-307-3171 MPN 37E52572-11Nose Block Assembly
- 1560-00-344-0715 MPN 95725Rudder Pedal Plunger
- 5935-00-356-8064 MPN GC810NM3AElectrical Receptacle Connector
- 1560-00-404-0684 MPN 128EC40158-1Duct Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-513-4942 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB511GF6-5 | Northrop Grumman Systems Corporation |