NSN 5306-01-513-5141
Coaxial Connector
Ceramic bonded.
Manufacturer part number GB511GF10-4 for national stock number 5306015135141.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-513-5141.
-
MPN or Model
GB511GF10-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.843 inches and 0.893 inches -
Fastener Length
Between 1.103 inches and 1.133 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.608 inches and 0.628 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Extended Washer Diameter
Between 1.040 inches and 1.050 inches -
Extended Washer Thickness
Between 0.140 inches and 0.160 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 0.677 inches and 0.697 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Sps-p-671, cagec 56878 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-001-5872 MPN GA800RK22-5Electrical Connector Backshell
- 4820-00-006-9929 MPN 128SCEC603-1Check Valve
- 1560-00-047-2054 MPN 89WM1351-1Wing Strut Assembly
- 5935-00-111-4792 MPN GC801CP1Electrical Plug Connector
- 5935-00-153-0926 MPN G355-2Electrical Connector Backshell
- 4820-00-171-1993 MPN 123H10068-502Directional Control Linear Valve
- 5935-00-201-1098 MPN GC15K18B8P6Electrical Receptacle Connector
- 1560-00-431-8497 MPN 134PP80010-871Fuel Vent Fitting
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-513-5141 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB511GF10-4 | Northrop Grumman Systems Corporation |